Reference: ANR4583PM
Land Rover Wolf Style Wheel 6.5x16" - Black
Reference: LRPC101
Brand: D6 CONCEPT
BUMPER D6 TO FIT LAND ROVER DISCOVERY II.
Reference: 985-24-075
Brand: FOX RACING SHOX
FOX SHOCK PERFORMANCE SERIES 2.0" IFP NISSAN PATROL REAR
Reference: 985-24-074
Brand: FOX RACING SHOX
FOX SHOCK PERFORMANCE SERIES 2.0" IFP NISSAN PATROL GR FRONT
RED Winch Atom 2
This ATOM winch is the ultimate high performance ultra compact single motor electric winch.
Designed primarily for the ATV, Polaris, Yamaha UTV vehicles this ATOM winch is capable of being used in the most demanding conditions.
The ATOM is an excellent choice for high speed and power when it comes to the best competition single motor electric winch for your ATV vehicle.
RED Winches has designed and developed this high performance winch for 4x4 competition use and serious motorsport events.
All products at RED winches have been through an extensive design and testing program before going on sale so you can use all our winches with confidence they will not let you down.
Speeds
24.7m/min (12v on 12v OX Motor)
49.4m/min (24v on 12v BOW 2)
Power
1500kg (12v on 12v BOW 2)
2000kg (24v on 12v BOW 2)
For your UTV or possibly a center winch, this winch can easily get you out of trouble very quickly, quietly and with minimum effort time and time again.
The winch body is CNC machined from high grade heat treated aluminium from solid billets. We only use the best machine tools and machining processes to ensure stress is kept to a minimum and strength to its maximum. With its patented air free spool and brake system the ATOM offers something previously unavailable on a winch to the off-road and motorsport sectors.
ATOM winch Anodised RED, with ‘Patented’ air brake system
Air Switch for free-spool and solenoid for brake operation built (to be mounted seperatly next to winch)
Albright Heavy Duty Solenoids x 1
Hard Anodised Aluminium fairlead (Included with Price)
As with all our winches, the ATOM winch does not come with a rope, this has to be purchased seperately.
Spring pressure applies a steel disc to the brake material when the winch is not in use.
This applies the brake and stops the winch from spooling out.
When you winch in or out you energise your Albright solenoids this also energises the air solenoid valve for the brake. This then allows air to go into a specially designed chamber that releases the brake instantly. When you remove your winching finger from the controls the air solenoid dumps the air and the springs apply the brake disc onto the brake pads. We can vary the number of springs in the brake to suit the weight of the vehicle if necessary but so far this has not be needed. More springs equals larger braking force but more abrupt stopping which can cause snatching which we do not recomend.
One nice feature is when you are lowering out you can switch your isolator off to the winch (no power to the motors) and just flick the winch out button on your dash. This fires the air solenoid and releases the brake and your vehicle only pulls out rope for the amount of drop your vehicle needs or moves. This means compared to normal winching you do not get overrun or excess rope causing snatching and jerking as the vehicle takes up the slack rope that has been spooled out. This design has been submitted for full patent and is currently protected and patent pending.
We would expect a set of brake pads to last at least 2 seasons due to the material they are made from.
Brake pad sets and all spare parts can be orderd if needed.
A piston on the end of the winch housing moves a large dog clutch in and out.
The winch is always engaged under spring pressure until air pressure is applied which pulls back the dog clutch and allows the drum to freely rotate.
When the air is off the spring will re-engage the dog clutch.
The drive is provided by a large splined drive shaft.
The electrical power of this winch is currently supplied by a BOW 2 Motor. These are supplied normally with a 12v supply from your vehicle. The high power Albright solenoid is used to switch direction of the motor and to also provide a feed to the 12v brake system. These are all proven components and widely available and have been used extensively in the competition and motorsport industry by RED Winches for many years.
Power of the winch is variable due to how your vehicle is setup and the quality of the components used. It also depends on the scale of electrical losses or inefficiencies in the wiring system. As a general rule running 12v DC BOW 2 Motor with a good powerful supply you can expect the winch to pull loads as specified above...possibly more under certain optimal conditions. We tested with 2 x Odyssey PC2150 batteries, 12V supply and ground connections made with a minimum of 50mm2 cable.
Winch: 20kg (Without Rope)
Shipping Weight: 25kg (with no rope or accessories)
The drive is mechanically provided by a solid steel splined shaft and dog clutch. This is a very tough design that engages and disengages by an air supply. The dog clutch is driven from the planetary gearbox by a solid steel central shaft. The drive system has been built for strength and durability. When not engaged the ‘free-spool’ of the ATOM drum is only between two roller bearings so it extremely free moving allowing the co-driver to run freely with the rope.
The drum can hold:
30m (90ft) of 8mm rope
40m (120ft) of 6mm rope
Line pulling power with electrics is in a world of its own as you probably know…and depends heavily on the quality of your electrical setup
We would say the ATOM can easily pull as a minimum 1500kg directly (hanging vertically with no support from wheels) But this does mean you will need:
Good battery (40Ahr Min) supplying the winch motors with enough power, and ideally one battery for the vehicle electrics
At least 50mm² high quality electrical cable
Clean electrical joints and if in areas prone to water joints should have conductive grease applied
We have been honest in our facts and have not blown the figures up high only to impress.....we work on real data as engineers....
The patented designed brakes work in a way that they only come off when a voltage is applied. When a signal is sent to the winch to operate either forward or reverse that same signal is used to energise the magnets and release the brakes. The brakes are 12v and will always need 12v to operate which is the same voltage used to operate the solenoids. The brake pad is made from a high strength composite ensuring a high strength braking grip, and longevity of the wearing surfaces.
The gearbox has been specifically designed for strength, power and ease of service. All gears are manufactured from 655-M13 nickel chromium molybdenum steel to give maximum strength and excellent durability. The end cover is sealed via an o-ring and groove, ensuring a watertight seal. Once the cover is removed access to all gears is possible and only takes 5mins to change all gears and re-assemble. The gearbox runs in grease not oil making it much easier to service in the field.
The Cobra has been designed with both competition use and servicing in mind. Two mounting blocks are provided to interface between the winch and the mounting frame. This reduces the risk of stripping the threads in the winch casing. The free-spool assembly is held in place with machine screws for ease of service.
We are confident to stand behind our products in competition use. All RED Winch Hornets are backed with a 2-year mechanical warranty. This covers all mechanical parts. Wearing parts, bearings, brake pads etc are excluded, as are electrical components, motors and solenoid packs
Reference: SB97417
Brand: SMITTYBILT
Winch SMITTYBILT XRC GEN2 17500 LBS
Reference: SB98495
Brand: SMITTYBILT
Winch SMITTYBILT XRC GEN2 9500 LBS Synthetic Rope
Reference: SB97495
Brand: SMITTYBILT
Winch SMITTYBILT XRC GEN2 9500 LBS
RED WINCHES ATOM 2
Need Help?
